12V 20A battery charger with adjust function
Detailed Photos
Packaging & Shipping
Packaging Detail: Within 3-5 working days after receipt of your 30% down payment
Delivery Detail: Gift Box + Carton Box Or Meet your package demands.
Product Description
12V battery charger 20A
1. AC220V 50Hz
2. DC14.2V output current 20A
3. Capacity 120-140AH
High quality 180-240VAC to 28.5V DC 10A battery charger
This product is an advanced integrated circuit switch Developed from, it can be the mains 165V-280V power between the width under pressure to charger the battery, the battery is fully charged will automatically shut down, float into the state, this time charging of the electrical storage pool with repair, so the battery will not overcharge or rechargeable battery sulfide caused shortages at the capacity and the use of old-fashioned low-frequency charger to increase the battery discharge capacity and service life.
Product Parameters
Inpurt voltage: AC220V50Hz
Output viltage: DC14.2V output current: 6A/10A/20A
Capacity of 6A(45-60ah) 10A(60-120AH) 20A(130-200AH) is among the most suitable (based on 0.1C-0.15 charger, charging time+ battery capacity / battery charger charging current.
The reason why this was labeled a segment of the original manufacturer result ). Small current charge is useful for extending battery life of.
Help
Please use the output of battery charger were connected folder to the battery positive and negative, the red clip to the positive (+), black clip for the negative(-), and then plug in the power, then you can be fully power.
Power light is red while charging, full of light Green, the battery is full charged, variable charging time 4-6 hours after light is appropriate, prohibit more than 12 hours.
This charger has putput reverse polarity protection features such as access counter, the charger will not work, swap the battery clip, you can work. The charger for the pulse of pure DC, so charging clip A small spark is normal.
Note
Consistent with positive and negative charge plug to avoid damaging the battery chargerGroup
The charger applies 12V< 120AH/220AH/440AH lead-acid or gel batteries Group, please do not mix with other battery to avoid damage to the charger or battery.
Confirm the local power grid voltage AC220-240V 50Hz.
The charger for lead acid battery in use, a determined tomaintain good ventilation, not inside around 20cm other items, and do not put sofas, beds, carpets andd the like may use the surface. Must not cover the chatger or foreign body plug the charger vents, etc. ) or direct sunlight around the use, or they will damage the charger or shorten life.
| No. |
Items |
Technical Specifications |
Unit |
Remarks |
| 1.1 |
Rated input voltage |
110-220 |
Vac |
|
| 1.2 |
Input voltage range |
90-264 |
Vac |
|
| 1.3 |
Input frequency range |
47-63 |
Hz |
|
| 1.4 |
Power factor |
>=0.96 |
|
|
| 1.5 |
Efficiency |
>=90 |
% |
Rated input, full load output |
| 1.6 |
Load regulation |
<=±1.5 |
% |
|
| 1.7 |
Voltage regulation |
<=±1 |
% |
|
For more info you need, pls contact us anytime!
Audited Supplier 
){kind=link}
){kind=link}