| Customization: | Available |
|---|---|
| Phase: | Single |
| Type: | DC/AC Inverters |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Type: | DX2000W | DX3000W | DX5000W | DX60000W | DX8000W | DX10000W | ||||
| DC12V | DC24V | DC48V | DC12V | DC24V | DC48V | DC48V | DC48V | DC96V | DC96V | |
| 1.AC Mode Specifications: | ||||||||||
| Input wave form | pure sine wave | |||||||||
| Input voltage | 220Vac | |||||||||
| Low voltage cut off | 145Vac±4% | 165Vac±4% | ||||||||
| Low voltage recover | 155Vac±4% | 175Vac±4% | ||||||||
| High voltage cut off | 285Vac±4% | 265Vac±4% | ||||||||
| High voltage recover | 275Vac±4% | 255Vac±4% | ||||||||
| Frequency | 50Hz/60Hz(Atomatic detection) | |||||||||
| Output wave form | pure sine wave | |||||||||
| Overload protection | alarm | |||||||||
| Short circuit protection | trip | |||||||||
| Efficiency | >95% | |||||||||
| Transfer current | 30A | 60A | ||||||||
| Transfer time DC TO AC | 10ms | |||||||||
| Transfer time AC TO DC | 10ms | |||||||||
| 2.Inverter Mode Specifications: | ||||||||||
| Rated power | 2000W | 3000W | 5000W | 6000W | 8000W | 10000W | ||||
| Power factor | 0~1.0 | |||||||||
| Output voltage | 220Vac | |||||||||
| Frequency | 50Hz ± 0.3Hz | |||||||||
| Automatic tracking the main frequency | Yes(start from the first connection)50Hz @48-54Hz/ 60Hz @58-64Hz | |||||||||
| Inputvoltage range | ±10% rms | (-25%/+20%) rms | ||||||||
| Efficiency | >80% | |||||||||
| Overload protection | (110%<load<125%) ±10%: 30S cut off output voltage | |||||||||
| (SMPS load) | (125%<load<150%) ±10%:cut off output voltage at once | |||||||||
| Peak Capacity | 4000VA | 6000VA | 10000VA | 12000VA | 16000VA | 20000VA | ||||
| Short circuit protection | Yes | |||||||||
| Input voltage | 12V/24V/48V/96V | |||||||||
| Min DC voltage | 10V/20V/40V/80V | |||||||||
| Undervoltage warning | 10.5Vdc ± 0.3Vdc (12V battery)/42Vdc±1.2Vdc(48V battery) | |||||||||
| 21.0Vdc ± 0.6Vdc (24V battery)/84Vdc±2.4Vdc(96V battery) | ||||||||||
| DC input too low, | 10.0Vdc ± 0.3Vdc(12V battery)/40.0Vdc±1.2Vdc(48V battery) | |||||||||
| Automatic cut off | 20.0vdc± 0.6Vdc (24V battery)/80.0Vdc±2.4Vdc(96V battery) | |||||||||
| input voltage warning &cut off | 15Vdc ± 0.3Vdc (12V battery)/30Vdc ± 0.6Vdc(24V battery) | |||||||||
| 60Vdc±1.2Vdc(48V battery)/120Vdc±2.4Vdc(96V battery) | ||||||||||
| Save power | load≤25W | |||||||||
| 3.Charger Mode Specifications: | ||||||||||
| Chargering current | 50A | 25A | 15A | 50A | 25A | 15A | 15A | 15A | 15A | 15A |
| Chargering current correction | ± 5Adc | |||||||||
| Battery initial voltage | 0 -13.7 Vdc | |||||||||
| Charger short circuit protection | trip | |||||||||
| Overcharger protection | V ≥14.7Vdc / 30.4Vdc, every half second sounds | |||||||||
| 4.Charging Rules: | ||||||||||
| Three Phases | constant current chargering →constant voltage phase →float | |||||||||
| 5.Monitor | ||||||||||
| Computer Monitor | RS232 | |||||||||
| 6.Protection | ||||||||||
| Low Voltage | LCD show low battery alarm | |||||||||
| High Voltage | alarm | |||||||||
| Inverter Mode overload | shut-down protection | |||||||||
| Over Temperature | Heatsink temperature.≥90°C,shut-down protection | |||||||||
| 7.Physical | ||||||||||
| Operate Temperature Range | 0°C to 40°C | |||||||||
| Store Temperature | -15ºC ~ 60ºC | |||||||||
| Operate Humidity | 5% to 95% | |||||||||
| Noise | 60dB max | |||||||||
| Cooling | fan in ventiltation conditions | |||||||||
| Dimension(L*H*W) | 450*215*180MM | 450*215*180MM | 620*215*180MM | 580*290*675mm | ||||||
| N.W (KG) | 20KG | 20KG | 20KG | 24KG | 24KG | 24KG | 44KG | 46KG | 80KG | 93.5KG |
){kind=link}